Moustafa Elsherief
Member
Hello guys
Could any one tell me what does this symbol "#" mean?
Could any one tell me what does this symbol "#" mean?
simple question
- Thread starter Moustafa Elsherief
- Start date
Paul B
Member
It indicates local data. This is declared locally inside the FC or FB. At the top of the editor you can drag down to see the local variables. Or print the block out and you will also see them.
Similar Topics
Hello again..trying something on an existing poorly written program and just wanted to double check something
system is an A-B MicroLogix 1200
In...
Hi all,
Writng a FB in ST on Beckhoff TC for a pulser which turns on and off on a cycle, is paused by turning bControlInput to FALSE, but resumes...
Hi all,
I have a simple question that I have overcomplicated and gotten stuck on. I have a variable, we can call it "light" that I need to stay...
Been working with PLCs for a couple of decades, but almost 100% DirectLogic. Have a customer who wanted me to make a couple of simple changes to a...
Will going online with a modicon controller in Proworx 32 write to the controller? I have a backup of the program open and would like to go...