clueless_one
Member
Hello All. Most of our machines have SLC 500's in them with processors ranging between 5/01 to 5/04's. We use a laptop computer with RSLogix 500 to communicate with the processors via a 1747 UIC module. My question, is there anyway to communicate with the processors using the ethernet/LAN port on the laptop instead of having to use the 1747 UIC modules. We have trouble with them all the time and it is a pain to get them to communicate again. If there is anyway to just plug an 8 conductor(RJ45) cable into channel 0 on the processor and plug the other end into the laptop that would save so much time.