faehigkeit1
Member
Hi All, we have a vacuum furnace system that has 3 slc 5/05 plc's connected to a host PC. Our IP dept. wants us to change the IP address on the host PC so that they can communicate with it. Not sure why the current IP address won't work for them.
If I figure out how to change the IP addresses on the slc 5/05 plcs's, will I have to cycle power or anything special ?
Any other concerns you may think of would be appreciated.
Thanks
Dean
If I figure out how to change the IP addresses on the slc 5/05 plcs's, will I have to cycle power or anything special ?
Any other concerns you may think of would be appreciated.
Thanks
Dean