Hi there,
I have SLC 5/05 PLC with one one expansion I/O rack.
The fault line is not on. However in the processor status debug page it lists this error "Remote power failure of an expansion I/O rack occurred."
The power to the expansion rack is on and the I/O are workin fine. The error cannot be cleared. I'm not sure why and was wondering if one of you great minds up there can point me in the right direction.
Thanks.
I have SLC 5/05 PLC with one one expansion I/O rack.
The fault line is not on. However in the processor status debug page it lists this error "Remote power failure of an expansion I/O rack occurred."
The power to the expansion rack is on and the I/O are workin fine. The error cannot be cleared. I'm not sure why and was wondering if one of you great minds up there can point me in the right direction.
Thanks.