Hello,
Problem:The accumlator value in the counter card freezes when my encoder wheel spins beyond 4.5K Hz. Ofcourse the rate would be 0 at that point and previous count is also 0.
My encoder is rated for 2500PPR. I am using ring config in range mode and figured out encoder spits out 5102 pulses/meter. I used 5102 as the reset value for ring to count the length in meters.
Any suggestions ? please...
Thanks,
Ven.
Problem:The accumlator value in the counter card freezes when my encoder wheel spins beyond 4.5K Hz. Ofcourse the rate would be 0 at that point and previous count is also 0.
My encoder is rated for 2500PPR. I am using ring config in range mode and figured out encoder spits out 5102 pulses/meter. I used 5102 as the reset value for ring to count the length in meters.
Any suggestions ? please...
Thanks,
Ven.