Hi ,
I have an SLC 505 that I made some changes to. After the changes were made the BTR and BTW instructions became extremely slow. I did not intentionally change any of this ladder logic for this I/O. It takes about ten seconds for the I/O to update / scan. Can anybody point me to what might be causing this issue?
Thanks in advance.
John
I have an SLC 505 that I made some changes to. After the changes were made the BTR and BTW instructions became extremely slow. I did not intentionally change any of this ladder logic for this I/O. It takes about ten seconds for the I/O to update / scan. Can anybody point me to what might be causing this issue?
Thanks in advance.
John