Slc5/05 & 1747-sn

[VSG-Tom]

We have successfully used the 1747-SN remote I/O expansion card w/ an A13 primary rack and an A7 expansion rack for years.

We are in the midst of an expansion to this machine as we needed just a little bit more I/O so we changed the A7 expansion rack to and A10. Everything still works except for the last 3 cards. How do I change the configuration on this to make them work?

I have attached the G-File from the I/O configuration of the 1747-SN card as it worked with the A13 primary and A7 expansion.

Thank you,
Tom

 

[Mickey]

Change from a "1/2 Rack" to a"Full Rack".

You may also have to change the dip switches on the Remote I/O Adapter ( the ASB module)

See manual..

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1747-um006_-en-p.pdf