clayc
Member
Hello there, Recently I have had to change the ethernet router in my system. The old system worked fine but the new router has a different set of addresses (slc5/05 was 192.168.2.10 new router has only addresses between 192.168.1.2 and 192.168.1.254). The processor was manually given the original address; both BOOTP and DHCP are disabled. Channel 0 is set for DF-1 communications. I would like to download the programming with new address information but I cannot see the slc5/05 in RSWho.My computer has no serial port so I am using a 1747-UIC. I am not sure what driver I should be using for the UIC. Any help would be appreciated.