cornbread
Lifetime Supporting Member
I have a project where I need to talk to and from a Siemens 7SJ6 relay via profibus. Is it as simple as adding a prosoft card MVI46-PDPMV1?
SLC500 profibus & Siemes 7SJ6 relays
- Thread starter cornbread
- Start date
Well, you could also use a gateway. If the SLC500 can do ModbusRTU:
http://www.anybus.com/support/support.asp?PID=140&ProdType=Anybus X-gateway
//Patrick L
http://www.anybus.com/support/support.asp?PID=140&ProdType=Anybus X-gateway
//Patrick L
Similar Topics
Anyone know a source for the SST-PFB-SLC card? Apparently SST was bought by Woodhead who was bought by Molex. I can find some references to SST...
Hi,
I am interested in learning more about SST Profibus cards used in Allen Bradley SLC500 racks.
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
can the slc500 5/05 send a email and text over Ethernet ?
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...