so big update today.
reinstalled my XP machine today so i can re-use the 7 day trial
my new OB16 output module works
and my OW16 also now works
turns out i had to select Assemble new rungs for some reason.
I now have a fully working SLC500 with an IB16, an OB16 and an OW16 module
one very happy guy here.
have some telemecanique buttons and lamps ready to go on it too.
Questions though if i may
q1)
The modules say they are "octbal" but SL500 enables you to program them as binary
e.g. I1:15 in the system is actually In17 on the module - What does everyone have configured for this in the programming mode?
q2) is there a way in SL500 to have a "Virtual output"
e.g. if input 1, 2 and 3 are all "closed" - virtual output "Check1" = on
so that in future programming rungs i can refer to "check1" rather then repeatedly checking
q3) what can i do with an ASB module? release i need another half.
q4) are the wiring connectors which screw onto the modules available as spares.. 1 of my modules (Blue) does not have the screw terminals adaptor?
thankyou in advance.