Here is the logic i am designing. The X3 is basically a push button when u press it once it put something in on position. when u press it again it will turn off that let say valve.
the C115 is just another conidtion.
anyways the problem i have is with the arrangement of network when i swap the rung on network 5 with the rung on network 6 the logic dooesn't work as it suppose to ..
Just need to know the explanation if anyone knows whats going on.
plz post thanks
the C115 is just another conidtion.
anyways the problem i have is with the arrangement of network when i swap the rung on network 5 with the rung on network 6 the logic dooesn't work as it suppose to ..
Just need to know the explanation if anyone knows whats going on.
plz post thanks