Hi All,
I was wondering if there is any device available such as Ethernet contactors-what I essentially want to do is open/close the contactor (or even relay will be okay), according to the command from PLC. I have got several contactors/relays, and if I am using one PLC for them, wiring all of the relays/contactors will be less ideal than using Ethernet communication.
Thnaks
I was wondering if there is any device available such as Ethernet contactors-what I essentially want to do is open/close the contactor (or even relay will be okay), according to the command from PLC. I have got several contactors/relays, and if I am using one PLC for them, wiring all of the relays/contactors will be less ideal than using Ethernet communication.
Thnaks