Eng_Klayan
Member
Anybody know What software for upload, download and editing program on B&R PLC ?
in this case, on CP60 as CPU on this PLC.
in this case, on CP60 as CPU on this PLC.
Software for CP60, B&R PLC
- Thread starter Eng_Klayan
- Start date
Eng_Klayan
Member
OP
Anybody know What software for upload, download and editing program on B&R PLC ?
in this case, on CP60 as CPU on this PLC.
bits'bytes
Member
Hello,
it is called PROSYS, you also need a special adapter for parallel port although I think serial should work also (cant remember well), please try to get in contact with support of B&R
http://www.br-automation.com/cps/rde/xchg/br-automation_com/hs.xsl/company_771_ENG_HTML.htm
br
bb
it is called PROSYS, you also need a special adapter for parallel port although I think serial should work also (cant remember well), please try to get in contact with support of B&R
http://www.br-automation.com/cps/rde/xchg/br-automation_com/hs.xsl/company_771_ENG_HTML.htm
br
bb
Please, where can I get this B & R adapter BRKAOL5-1 (new, used or repaired). Waiting for your comments [email protected]
Similar Topics
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
i have 2 backups:
*.PVC and *.pvd file types
thanks in advance for any help
Hi,
I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...
Hello, good morning, I have been having two problems with the Tia Portal software.
The first is that I have installed it on my computer and...
hi All
Can you please help me to find the right software to open Zip backup of 434 12A PLC?
Any major steps I need to know when opening?
Regards