I have an SLC 500 1747-L552 with one module, an SST-PB3-SLC. This is a Profibus module from Molex. This module goes to 3 Beckhoff BK3120s and 1 BC3100. There also 4 Micromaster Siemens VFDs in the network. There was an issue with the Profibus communication. While troubleshooting the issue, the profibus cable was removed from several modules, and power was cycled. The Beckhoff remote io has the correct LED indicator lights, however, the io mapping is now off on all Beckhoff modules except the first mapped remote io. There is another machine just like this one and we took the SST Profibus configuration and loaded it into the SST-PB3-SLC module with no change in mapping. Is there a way to map the io?