Hi
I have an application where I am using a SST-PFB-SLC in slot 2 of a SLC500 rack. The SST-PFB-SLC is connected to a profibus panelview. This aspect of the project works fine. Now I am required to insert a new machine into this network. This machine will use a SST-PFB-SLC to communicate with its own profibus panelview. I need to exchange data between the two SST-PFB_SLC's. Any advice how to transfer data? Should one be configured as a slave the other a master?
Thank you for your advice,
Derick
I have an application where I am using a SST-PFB-SLC in slot 2 of a SLC500 rack. The SST-PFB-SLC is connected to a profibus panelview. This aspect of the project works fine. Now I am required to insert a new machine into this network. This machine will use a SST-PFB-SLC to communicate with its own profibus panelview. I need to exchange data between the two SST-PFB_SLC's. Any advice how to transfer data? Should one be configured as a slave the other a master?
Thank you for your advice,
Derick