sparky64
Member
I've been asked to do a project that involves fitting a strain gauge to a vertical pressing machine, and then using the signals from it, to interlock the machine.
My question is, how do i work out where to mount the strain gauge, or can i mount it any where on the backplate of the press.
I can do the controls side of the project no problem, but haven't got a clue as to where i should mount the strain gauge.
Thanks for any help
Sparky
My question is, how do i work out where to mount the strain gauge, or can i mount it any where on the backplate of the press.
I can do the controls side of the project no problem, but haven't got a clue as to where i should mount the strain gauge.
Thanks for any help
Sparky