Hello everyone, I am new to my job and working on a project that I don't fully understand. Here's the gist:
An older Panelview application assembled in an older build of Panelbuilder needs to be updated to FactoryTalk View. The original program was done in a version of Panelbuilder that is too old to import directly into FactoryTalk so it was imported into a newer build of Panelbuilder and then again into FactoryTalk. The graphics came through great, but in the process all the tagnames were dropped and what I have are aliases back to some PanelView remote I/O addresses. Here's an example:
[PVRIO]Tag_BI1_10_0-10_15_Bin
For the life of me I can't find a way to translate that to a PLC address (PLC5/20E). Does that address make any kind of sense to any of you? If so, can you help me figure out how to map that back to a real PLC address? Like an N or B, etc...
Thanks in advance for your help.
An older Panelview application assembled in an older build of Panelbuilder needs to be updated to FactoryTalk View. The original program was done in a version of Panelbuilder that is too old to import directly into FactoryTalk so it was imported into a newer build of Panelbuilder and then again into FactoryTalk. The graphics came through great, but in the process all the tagnames were dropped and what I have are aliases back to some PanelView remote I/O addresses. Here's an example:
[PVRIO]Tag_BI1_10_0-10_15_Bin
For the life of me I can't find a way to translate that to a PLC address (PLC5/20E). Does that address make any kind of sense to any of you? If so, can you help me figure out how to map that back to a real PLC address? Like an N or B, etc...
Thanks in advance for your help.