Aviator|Chris
Member
Hi there,
I am struggling with the CIP path for a particular project.
Setup is an 1769-L35E CompactLogix processor connected to Ethernet (192.168.1.160).
Also connected to the Ethernet is a ControlLogix 4-Slot Rack (192.168.1.170), in Slot 0 is a 1756-ENBT card, and in Slot 1 a DHRIO card.
The DHRIO card (Node 70) talks to the existing DH+ Network and can see all nodes when looking in Linx. Ethernet functionality is fine.
What would the CIP path be on the L35E to read data from a ControlLogix PLC located on the DH+ network at Node 61.
Cheers.
I am struggling with the CIP path for a particular project.
Setup is an 1769-L35E CompactLogix processor connected to Ethernet (192.168.1.160).
Also connected to the Ethernet is a ControlLogix 4-Slot Rack (192.168.1.170), in Slot 0 is a 1756-ENBT card, and in Slot 1 a DHRIO card.
The DHRIO card (Node 70) talks to the existing DH+ Network and can see all nodes when looking in Linx. Ethernet functionality is fine.
What would the CIP path be on the L35E to read data from a ControlLogix PLC located on the DH+ network at Node 61.
Cheers.
Last edited: