EmpireShallRise
Member
Hello,
I been trying to pull the probe readings from my Metro M400 air gages through a modbus to a plc. I have a connection right now between the plc and metro, but I can't get any readings from it. The connection sts_overlap error pops on and then the sts_overload comes on after that. I'm not sure how to remedy this problem, but any insight would help?
[url]https://ibb.co/gjYch22[/url]
[url]https://ibb.co/bKrCZ4w[/url]
[url]https://ibb.co/dBspcx8[/url]
[url]https://ibb.co/PCNTnTs[/url]
[url]https://ibb.co/gjYch22[/url]
[url]https://ibb.co/bKrCZ4w[/url]
[url]https://ibb.co/dBspcx8[/url]
[url]https://ibb.co/yV14VCT[/url]
I been trying to pull the probe readings from my Metro M400 air gages through a modbus to a plc. I have a connection right now between the plc and metro, but I can't get any readings from it. The connection sts_overlap error pops on and then the sts_overload comes on after that. I'm not sure how to remedy this problem, but any insight would help?
[url]https://ibb.co/gjYch22[/url]
[url]https://ibb.co/bKrCZ4w[/url]
[url]https://ibb.co/dBspcx8[/url]
[url]https://ibb.co/PCNTnTs[/url]
[url]https://ibb.co/gjYch22[/url]
[url]https://ibb.co/bKrCZ4w[/url]
[url]https://ibb.co/dBspcx8[/url]
[url]https://ibb.co/yV14VCT[/url]
Last edited: