I geared two axis in studio 5000. The drives are kinetix 5700. My question is that if starting actual position of two axis are same they both work fine with gearing but if one of the axis is a bit slipped somehow before gearing , the gearing always keeps this difference.
For example if both are 75mm and I jog them they both go 90mm. That is fine
but if one is at 80 an the other is 75 before gearing. Final positions are 95 & 90 but I want them to be same like 95 & 95.
Is there any built-in command in gearing for this or Should I do it in plc program by myself ?
Thanks,
For example if both are 75mm and I jog them they both go 90mm. That is fine
but if one is at 80 an the other is 75 before gearing. Final positions are 95 & 90 but I want them to be same like 95 & 95.
Is there any built-in command in gearing for this or Should I do it in plc program by myself ?
Thanks,