ELWOODEOD Member E Join Date Jun 2019 Location Louisville, KY Posts 1 Jun 28, 2019 #1 Looking for a program example for Omron NX102 processor using sysmac studio to interface with Keyence SR-1000 barcode reader.
Looking for a program example for Omron NX102 processor using sysmac studio to interface with Keyence SR-1000 barcode reader.
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Jun 28, 2019 #2 Welcome to the forum! If you go to the website www.barcodereader.com you will find example PLC projects. Unfortunately, there are none available for NX series with SR1K, but there are ones for other models which may help you as a starting point.
Welcome to the forum! If you go to the website www.barcodereader.com you will find example PLC projects. Unfortunately, there are none available for NX series with SR1K, but there are ones for other models which may help you as a starting point.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Jun 29, 2019 #3 +1 the_msp https://www.keyence.com/support/user/barcode/download/connections.jsp Look at the CJ2 samples with the corresponding interface media. Regards,
+1 the_msp https://www.keyence.com/support/user/barcode/download/connections.jsp Look at the CJ2 samples with the corresponding interface media. Regards,