Test_ze_epos
- Thread starter gandr
- Start date
Similar Topics
Hi,
I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
I am trying motor startup with pf525 drive by using wizard start over ethernet communication but during direction test it's showing control error...
See code at the bottom.
Hi all.
For the story, this is my first complete project using a Rockwell PLC, I've been mostly working with Unity Pro...
My question is regarding the number of Test outputs vs the number of inputs in a module.
In the case of a 1734-IB8S card, there are 4 test...
Hi,
I have to test a control logic that required to change the input temperature as the process variable from thermocouple transmitter on the...