ThePortLion
Member
Hi
I hope there is someone can help me out on this one. I have
a Texas 505 CPU with an RS232 comm's port. I have a USB to Serial
converter cable but can't get it to work.
I've installed the drivers and in my device manager
under ports, appears a new port "USB to Serial Port" with COM4 address. Everything looks fine, yet no comm's. I've played about with the port speed with no luck. I'm using TiSoft with the Texas CPU.
Thanks in advance.
I hope there is someone can help me out on this one. I have
a Texas 505 CPU with an RS232 comm's port. I have a USB to Serial
converter cable but can't get it to work.
I've installed the drivers and in my device manager
under ports, appears a new port "USB to Serial Port" with COM4 address. Everything looks fine, yet no comm's. I've played about with the port speed with no luck. I'm using TiSoft with the Texas CPU.
Thanks in advance.