Orn Jonsson
Member
Is there a simple way to test if all 3 phase outlets in the same facility are wired the same way?
If I drag a machine from one corner of the plant to the next, I would prefer that the motor would turn the same way at both locations... (no leg swapping).
Can one use a DMM to test for phase 1, 2, and 3, ?
Thanks,
If I drag a machine from one corner of the plant to the next, I would prefer that the motor would turn the same way at both locations... (no leg swapping).
Can one use a DMM to test for phase 1, 2, and 3, ?
Thanks,