psychosunshine
Member
I have a customer complaining about an Automation Direct through door disconnect SD1-016-RR with a SD-HRY Handle. It was mounted with din rail and not mounted directly to the sub panel.
I am quoting a new panel for this customer and was wondering if someone could recommend there favorite best choice for a through door disconnect.
This panel is going to be 24 x 24 and we are just switching 120 VAC (single phase) for this box. No 3 phase power at all.
I'd like to try to keep the price under $500 for the disconnect. The flange mount 1494F-N30 from Allen Bradley is over $600 and it requires a few other options that add up to over $900.
I am quoting a new panel for this customer and was wondering if someone could recommend there favorite best choice for a through door disconnect.
This panel is going to be 24 x 24 and we are just switching 120 VAC (single phase) for this box. No 3 phase power at all.
I'd like to try to keep the price under $500 for the disconnect. The flange mount 1494F-N30 from Allen Bradley is over $600 and it requires a few other options that add up to over $900.