TI 500-5037 cal instructions

John Soltesz

Member
John Soltesz
Join Date
May 2007
Location
Pemberville, Ohio
Posts
260
Does anyone have the calibration instructions for a TI 500-5037 8ch analog input module? I have the manual for a 500-5009 but I will not be doing the cal so it would be best to give the tech the real instructions. A while back our company had a 5S cleanup program and some new guys got carried away with disposing of old documentation. If you look at my office you can see I didn't subscribe to it.
I tried looking on-line but only found newer 505 stuff.

Thanks,
John
 

Similar Topics

P
Communication with an slc500 1747-L30A
I have a slc500 plc 1747-L30A. Using a communication cable 1747-PIC cable box combination. Running a version of software from DOS on a Windows 3.1...
Replies
6
Views
88
James Mcquade
J
T
Kinetix 5500 issue
Hello everybody, I have Kinetix 5500 (2198-H040-ERS). I'm having issue with this drive. (I believe it's the drive/Kinetix and need confirmation)...
Replies
0
Views
46
tjntjntjn
T
Z
SLC 500 Integers pulsing
Howdy everyone, My company has a few machines running on SLC500 based PLC, and everytime it makes a part we count up on the counter which gets...
Replies
6
Views
154
drbitboy
drbitboy
J
Kinetix 5500 DCBusUnderVoltageFactoryLimit
Good day: I am wondering if anyone has experience with the Kinetix 5500 S33 Fault. I have 3 drives in a group set as follows: 2198-H025-ERS2...
Replies
5
Views
186
JamesCash
J
M
logix 500 timers vs studio 5000 timers
I recently did a program conversion from logix 500 to studio 5000 and when machine runs it depends on two ton instructions to keep the machine in...
2
Replies
17
Views
542
Mgw1970
M
Back
Top Bottom