ilikbeer
Member
Hello from the frozen tundra of Ohio. Hope all the ole reliables are still around. Have been off learning the languages/scripts of the PC world. Nice to get back to the real world of PLCs.
One for the old TI 545 guys.
I recently added a large amount of logic to a TI545-1101 program to start getting information to our new Wonderware package. Even after moving as much memory around as I could, I am running out. Less than a total of 2k left, and I am sure someone will want some information I missed somewhere. I have heard rumors that there is a way (card or module) to expand the memory on the 545-1101. Does anyone know if this is true and what part number that would be. I have looked through all of our manuals, checked the Siemens site, done several different Googles, and no luck.
Thanks in advance even for a once over. It is good to see the old neighborhood, even if you can not stay for long.
One for the old TI 545 guys.
I recently added a large amount of logic to a TI545-1101 program to start getting information to our new Wonderware package. Even after moving as much memory around as I could, I am running out. Less than a total of 2k left, and I am sure someone will want some information I missed somewhere. I have heard rumors that there is a way (card or module) to expand the memory on the 545-1101. Does anyone know if this is true and what part number that would be. I have looked through all of our manuals, checked the Siemens site, done several different Googles, and no luck.
Thanks in advance even for a once over. It is good to see the old neighborhood, even if you can not stay for long.