TMC2CONV01 x TMC2SL1 for Schneider Electric M221?

Paulo Balbino

Member
P
Join Date
Feb 2023
Location
Abu Dhabi
Posts
7
Hi,


I am stuck with these SE cartridges, I am trying to add a second serial port rs485 to a M221 PLC. What is the difference between TMC2CONV01 and TMC2SL1 cartridges? I am looking just for an extension port for the M221, so I can work with generic devices reading/writing (Read var/Write Var) from different sensors.

I tried adding them to the Schneider Electric Machine Expert Basic, they seems similar.

Thanks,
Paulo
 

Similar Topics

K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
45
[email protected]
K
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
136
S.Woollett
S
M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
67
Munish
M
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
109
Para
P
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
196
jillgeorge18
J
Back
Top Bottom