Hi,
I've got a nasty job to do. I have very old TP 27 protool project that involves area pointers such as ACK, Data Mailbox, Interface Area and Screen Number.
I need to convert it to MP 277 10", during conversion to WinCC Flexible ( 277's to new for ProTool ) I've got warnings about Functions not being able to convert ( Data Rec DAT -> OP/PLC or
Data Rec PLC -> OP/DAT ), so I've took a lecture of SIMATIC HMI
WinCC flexible 2005 Migration manual... and Ok - i should replace those functions with Set/Get DataRecordToPLC...
but Protool functions have a parameter Data Medium which WinCC Flex don't have, why ?
Second thing is, that i need to update PLC program after conversion ( Data record pointer 4TH Status Word ) - what does it mean ?
What else should I do to make the MP back and running, without changes in S7 source ? ( Very old program, written in German - not my best language - that's why i'm afraid )
I've got a nasty job to do. I have very old TP 27 protool project that involves area pointers such as ACK, Data Mailbox, Interface Area and Screen Number.
I need to convert it to MP 277 10", during conversion to WinCC Flexible ( 277's to new for ProTool ) I've got warnings about Functions not being able to convert ( Data Rec DAT -> OP/PLC or
Data Rec PLC -> OP/DAT ), so I've took a lecture of SIMATIC HMI
WinCC flexible 2005 Migration manual... and Ok - i should replace those functions with Set/Get DataRecordToPLC...
but Protool functions have a parameter Data Medium which WinCC Flex don't have, why ?
Second thing is, that i need to update PLC program after conversion ( Data record pointer 4TH Status Word ) - what does it mean ?
What else should I do to make the MP back and running, without changes in S7 source ? ( Very old program, written in German - not my best language - that's why i'm afraid )