I have a TP270, I have the profibus cable connected between the HMI and PLC, I have the PLC profibus address set as 2, on the HMI under the "connections tab" I have, Name: PLC_2, Active: On, Station: (I only get MPI option, I think I want DP), what am I missing?
TP270 10'' to 314c-2dp communication setup
- Thread starter FAGARCIA
- Start date
Similar Topics
Hi guys, I have a trainer with a Siemens S7-315 Processor and a TP270 HMI, using an MPI adapter to connect. I have gone over every setting I can...
Dear all,
We are using a TP270 6" in our machine we dont have the original back up of the touch panel having two problems.
1) m trying to upload...
Hello everybody!
I have a question about PLC CTI 2500 model C200. We have device with this controler but it hasn't a operating panel. I want...
Hello,
I am using step7 v5.5 and wincc flex 2008. I have created my PLC program have it working, but I am having trouble with my...
Hello to all and thanks for your interesting website
I was trying to get data from Siemens TP270 panel using WinCC flexible2008
When Downloading...