Hello Everyone! I just became a member of this great site.
I have a PLC program from an S5-100U PLC, and now I want to make a PDF report of all Blocks and Functions of the PLC in LAD lenguage. I found that the proper way was to convert the S5 PLC program to S7 and then translate from STL to LAD. And everything was converted from STL to LAD well so far, but some of STLs were not converted.
For example the next STL could not be converted to LAD, does anyone know what do I have to correct in this code in order to be translatable? I'm not good at STL language... Any help is appreciated. Thank you!
L #MIN
L #_REAL
>I
JC M001
BEU
M001: L #MIN
T #_REAL
L #MIN
L #_REAL
>I
I have a PLC program from an S5-100U PLC, and now I want to make a PDF report of all Blocks and Functions of the PLC in LAD lenguage. I found that the proper way was to convert the S5 PLC program to S7 and then translate from STL to LAD. And everything was converted from STL to LAD well so far, but some of STLs were not converted.
For example the next STL could not be converted to LAD, does anyone know what do I have to correct in this code in order to be translatable? I'm not good at STL language... Any help is appreciated. Thank you!
L #MIN
L #_REAL
>I
JC M001
BEU
M001: L #MIN
T #_REAL
L #MIN
L #_REAL
>I