Hi I am new to twido and am looking for some help on where to start with a project i have on. I am looking for a way to input a formula in to twido to calculate volume of a horizontal cylinder tank. The tank will perfectly level and I know the formula but am un sure how to enter it into twido. I am guessing this would be done with a operation block or several operation blocks.
The formula for the volume is as follows
vol=lengthx[(r2acos((r-d)/r) - ((r-d) X (Sqroot(2rd)-d squared)]
where r=radius of container
d=depth of liquid
and all measurements are in the same units.
I will be getting a signal from a ultrasonic level transmitter. Just need some ideas as to how this would be input into the twido.
Hopefully someone can help out.
The formula for the volume is as follows
vol=lengthx[(r2acos((r-d)/r) - ((r-d) X (Sqroot(2rd)-d squared)]
where r=radius of container
d=depth of liquid
and all measurements are in the same units.
I will be getting a signal from a ultrasonic level transmitter. Just need some ideas as to how this would be input into the twido.
Hopefully someone can help out.