Good morning all! ( at least fo he ones living around the GMT+1 area)
Im having some problems with my program while using serial communication.
I then used the sample program from the TwinCAT informaton system just to make sure i was'nt screwing up, but i got the same error:
as soon as SendBusy becomes TRUE, SendErrorID becomes COMERROR_TXBUFFOVERRUN, i dont understand this error
So im can see data in the sendstring, but no data in the received string, i also used hhperterminal but i dont see anything being hello worlded to my screen =(
I linked the variables in the systemsmanager ( Status, Control, Input and output) so i think that cant be the cause of the problem.
I hope i made the probem as clear as possible, if not, please contact me for details. Thanks in advance guys/girls!
Im having some problems with my program while using serial communication.
I then used the sample program from the TwinCAT informaton system just to make sure i was'nt screwing up, but i got the same error:
as soon as SendBusy becomes TRUE, SendErrorID becomes COMERROR_TXBUFFOVERRUN, i dont understand this error
So im can see data in the sendstring, but no data in the received string, i also used hhperterminal but i dont see anything being hello worlded to my screen =(
I linked the variables in the systemsmanager ( Status, Control, Input and output) so i think that cant be the cause of the problem.
I hope i made the probem as clear as possible, if not, please contact me for details. Thanks in advance guys/girls!