Unity Pro & Modbus Addressing

[Zubairjaved786]

Hi Everyone...!!!!
I have been working on Project on Unity Pro.I have configured my DDI32 module to Mixed Topology and State Ram (see attached pic). %I1 to I32 but what will be their corresponding addresses. In vijeo Frame i have assigned %I1 as 10001.In simulation mode , When i force the %I1 nothing happens in vijeo frame simulation.
Please Help me out...!!!

 

[chud]

I have never done this, but what is normally done is writing the %I and %Q to memory bits and then reading it from HMI.
But looking at those pics it should be possible on schneider screens. Have you tried linking a built stu file to the Vijeo variables. That way at least you could see what the address created woul look like