Unity Simulator & Magellis

[rosscodye]

I have Unity Pro running a PLC simulator (Schneidere Premium). That works fine.
The target environment has a Magellis HMI.
I want to test the HMI on the Unity Simulator.
Can anyone advise:
- driver to use
- config details
- adressing details for PLC points

Thanks
Ross

 

[Schtiel]

- driver to use

Modbus TCP

- config details

In Vijeo Designer:
IO Manager - New Driver - Schneider Electric Industries SAS - Modbus TCP/IP, then enter IP address of PC running Unity Pro PLC simulator

 

[chud]

Sorry schtiel but dont you have to enter the ip 127.0.0.0 in vijeo designer or is this the same as entering the local pc's ip adress?