Uploading with concept

mugamba

Member
M
Join Date
Aug 2005
Location
Zadar
Posts
4
Is it possible to upload program from PLC with Concept if we don't have the original program? The CPU is QUANTUM 213-04x.
I've managed to retrive PLC-configuration and diagnostic information but the program simply wouldn't upload. The error message said something about data compatibility issues. I have CONCEPT 2.5 with SR2. Thanks in advance.
 
You can upload from Concept 2.5 if the program was installed in the PLC with the upload info enabled. Under the Project menu there is a selection called "code generation options" this needs to be checked for upload capability. You need to create a blank project, connect to the PLC and then attempt an upload and hope that the upload info was included by the person that originally loaded the program.


Steve
 

Similar Topics

J
Uploading pcl File into Caterpillar Pl1000E
How can I access the web page that allows me to see and upload the pcl or translation file into my Pl1000E? My Pl1000E doesn’t have an ethernet...
Replies
2
Views
142
John07
J
P
CCW Micro850 Uploading issues
Hi guys, I have had some issues with uploading a program from a Micro 850 PLC. This is the first time connecting so I don’t have a file on my...
Replies
8
Views
311
PLCrookiee
P
Y
Uploading program from Siemens PLC via CP 343-1
Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
177
tarik1978
T
K
Motorola ACE 3600 - Problem Uploading
Hi all, Im stuck trying to support a client with Motorola ACE.. I was able to upload all of the other sites to STS but one. Im working remotely...
Replies
0
Views
119
kingofpoland2
K
A
Modicon M258 uploading program error
Hey, i'm getting an error when i try to upload a program from a modicon M258 TM258LF42DT using eithernet. i tried using both SoMachine V4.1 and...
Replies
12
Views
1,340
Lare
L
Back
Top Bottom