Using Profihub B4F02 in Ring Topology

Engineer_UA

Member
E
Join Date
Oct 2016
Location
California
Posts
43
Greetings,

Is it possible to network together multiple Profihub B4F02 and host PLC using fiber optics in a ring network configuration. I've got SCADA PLC and multiple profihub devices scattered around multi building facility.

Any input would be appreciated.
Thanks,
EE
 

Similar Topics

W
Reasons for using Tc2_NcFifoAxes?
Hi I'm very new to PLC programming and I'm trying to find out if this library (Tc2_NcFifoAxes) is necessary for our task In our case we need to...
Replies
0
Views
38
wopadidoo123
W
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
79
Alibaba07
A
T
Using Patch Panels in Control Panels
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
Replies
3
Views
134
nicherbert
N
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
246
Jkoso
J
L
Using RAs IO Device Library with 1576-ENBT
Hi, I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...
Replies
0
Views
79
LabRat906
L
Back
Top Bottom