Paul_Pereira
Member
Hi I'd like to know the purpose of having puTTy on the PanelviewPlus 600. Can I use it to VNC to my panelview when I'm not on the same network over the internet? I don't see why it exists as a preinstalled application.
Using Putty on Panelview
- Thread starter Paul_Pereira
- Start date
Paul_Pereira
Member
OP
Is there something in how to use putty on the panelview?
JaxGTO
Member
The only reason I can think of to have it on a PV is to access Stratix or other switches using SSH.
Similar Topics
G'day lads,
I'm setting up a modem that is connected via rs232 to a PC running Citect on one of our plants.
MY GOAL IS: To send an SMS to a...
Hi
I'm very new to PLC programming and I'm trying to find out if this library (Tc2_NcFifoAxes) is necessary for our task
In our case we need to...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...