Uticor PGI100

burnerman

Member
B
Join Date
Nov 2005
Location
Huddersfield
Posts
212
This one's probably for our friends down under.

I have a client with a Uticor PGI100 touchscreen connected to an A/B 5/03.

Is it possible to extract the program from the HMI and see what's going on? If so, where might I look for the software and cable?
 

Similar Topics

G
UTICOR PGI100 Setup Screen
Hi I am trying to connect to a Uticor PGI 100 terminal but don't know the communication settings or the com port configuration. My client did...
Replies
0
Views
1,690
garodrig6
G
A
Uticor PV700 communication with PLC 5/20 allen bradley
hello, we are using allen bradley plc 5/15 with uticor hmi pv700. but now we replace plc 5/15 with 5/20 but the uticor hmi is not communicating...
Replies
0
Views
924
affanqamar
A
Z
PLC 5/15 communication with Uticor hmi
I have Allen Bradley PLC 5/15 installed with AB Panel View 1400 using DH+ communication on machine. As PV 1400 is now obsolete so i m replacing it...
Replies
7
Views
3,265
RonJohn
RonJohn
L
UTICOR Message display to Controllogix
I have a UTICOR message display that was connected to a PLC 5/20E channel0 serial port, RS-422 (5 wires GND, SD+, SD-, RD+, RD-) I've upgraded...
Replies
4
Views
1,912
dmargineau
D
M
Red Lion Vs Uticor
Hey guys, I am faced with making a tough decision of choosing between a Red Lion G3 series HMI and a Uticor Tough Panel. I have heard great things...
Replies
6
Views
7,295
JeffKiper
JeffKiper
Back
Top Bottom