Vipa MCC

I see, the MMC card has the code for releasing the bigger memory size.
From the VIPA manual:
There is the possibility to extend the work memory of the CPU. For
this, a MCC memory extension card is available from VIPA. The MCC
is a specially prepared MMC (Multimedia Card). By plugging the MCC
into the MCC slot and then an overall reset the according memory
expansion is released. There may only one memory expansion be
activated at one time. On the MCC there is the file memory.key. This
file may not be altered or deleted. You may use the MCC also as
"normal" MMC for storing your project.
To distribute images for sharing licenses would be piracy. This is a no-no on this forum.
 

Similar Topics

Dear sir, I am using SIMATIC 300, CPU 315-2DP , (6ES7 315-2AF03-0AB0) VIPA 603-1CC21 A1.0 RAM 32KB, Firmware=V4.0.8 The problem Im using MPI...
Replies
2
Views
170
Got a VIPA 315-2AG23 that i try to go online with but can't seem to make it work through a network. I can go online if i'm plugged directly in the...
Replies
4
Views
275
Hello Friends I need to monitor a PLC Vipa. Which software and cable do i need? The upload will have the comments? Thanks in advance.
Replies
2
Views
1,539
Does anyone have the pinout for a vipa Greencable? I am trying to connect to a unit using the multitude of Siemens MPI adapters I have tried USB...
Replies
0
Views
1,133
Hi guys, cold you help me, please, does anyone know, how works addressing of VIPA modul? The marker "M 26.6" is not set, because "MD 1032" is...
Replies
0
Views
1,409
Back
Top Bottom