How to connect to VIPA CPU?

asteroide

Member
A
Join Date
Jul 2010
Location
der
Posts
158
Hello Friends

I need to monitor a PLC Vipa.

Which software and cable do i need?

The upload will have the comments?

Thanks in advance.

Vipa.jpg
 
And it appears that there is an Ethernet RJ45 port called "PG/OP", so an Ethernet cable maybe ?

Why even ask here ? Surely there must be a manual from VIPA on how to connect to the PLC.
 

Similar Topics

A
How to connect with a VIPA CPU 214?
Hello friends I have a VIPA CPU 214, I need to do a little change. It has MP2I interface. Which is the software that I need? Which is the...
Replies
7
Views
5,929
Traloch
T
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
9
Views
203
mburtis
M
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
97
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
109
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
343
TheColt46
T
Back
Top Bottom