How to connect to VIPA CPU?

asteroide

Member
A
Join Date
Jul 2010
Location
der
Posts
158
Hello Friends

I need to monitor a PLC Vipa.

Which software and cable do i need?

The upload will have the comments?

Thanks in advance.

Vipa.jpg
 
And it appears that there is an Ethernet RJ45 port called "PG/OP", so an Ethernet cable maybe ?

Why even ask here ? Surely there must be a manual from VIPA on how to connect to the PLC.
 

Similar Topics

A
How to connect with a VIPA CPU 214?
Hello friends I have a VIPA CPU 214, I need to do a little change. It has MP2I interface. Which is the software that I need? Which is the...
Replies
7
Views
5,966
Traloch
T
K
Configuring Stratix 5400 to connect to a Stratix 5700
Greetings, I had an issue with a RIO rack 2 and IFM I/O Link dropping on my network. I would loose connection for a second or 2 then they would...
Replies
3
Views
104
harryting
H
Suhail
help me out to connect lenze i700 to PC
Hi friends, i need a help to know the procedure and steps to connect Lenze i700 to PC for parameterize. i tried with lenze easy-starter using LAN...
Replies
0
Views
58
Suhail
Suhail
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
76
Zubairjaved786
Z
S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
372
JesperMP
JesperMP
Back
Top Bottom