who's fault is it???

roadrunner3g

Member
R
Join Date
Apr 2005
Posts
1
Hi I am new to plcs and a student.
I have an Allen Bradly micrologix 1000 mod#1761-l16bwa series E frn 1.0 .
the 24v power suply was shorted and the plc went into fault mode. can I save it?????
what do i need to do to get it back to normal.?!?!?
:unsure:
 

Similar Topics

U
allen bradley kinetix 300 E11 fault code
in allen bradley kinetix 300 drive first E31 error shows after resting drive E11 error occurs need solution to reset E11 fault code
Replies
0
Views
5
Uttam_994
U
P
PowerFlex 525 Fault Input Anomaly
All, I have a PowerFlex 525 driving an agitator motor. The goal is to have the agitator start automatically after a power loss or a comm loss. I...
Replies
2
Views
88
plcgrasshopper
P
E
1747-sn FAULT
hello I am getting a 57h fault - Specialty I/O module has not responded to a lock shared memory command within the required limit. Fault randomly...
Replies
2
Views
98
Etech883
E
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
115
Kataeb
K
B
Kinetix 5300 MSO causing ExcessiveVelocityErrorFault
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
159
padees
P
Back
Top Bottom