WinCC 7.0 Displaying Integers

[Manglemender]

Hello Forum Members,

Does anyone know how I can display an integer with an offset decimal point in WinCC 7.0?

Let me explain. A process variable in the PLC is scaled 0-10000 = 0-100%. In WinCCFlex you can shift the decimal point to display 100.00 but it doesn't seem to be posible in WinCC. I know that it is posible to use linear scaling on the tag but this rounds up/down to the nearest integer which isn't what I want.

Any Ideas?

Nick

 

[BIJEH]

Hi every body
I have a problem using Float Data type in WinCC Flexible
When I read Data from PLC-S7-300 ,The data value multiplay in 1000(Data Type in PLC is real,And Data type in WinCC Flexible is Float)
I did'nt used scaling in WinCC Flexible