WinCC work in asynchronious mode?

metaller

Member
metaller
Join Date
May 2004
Location
Bratislava
Posts
86
Is there any possibility to set WinCC to work in asynchronious mode as client with Novotek Comli OPC server?
I know, it's hard question, but does anyone have experience with connection WinCC with SattConn via Novotek Comli setver?
 

Similar Topics

A
Javascript Snippet in WinCC Unified
Hello Experts I am working on a project with WinCC Unified v16 PC system and want to create an option on the screen to export logs to the...
Replies
0
Views
11
aamirawan91
A
B
HMI GRAPHICS MISSING_WINCC UNIFIED V18.UPD3
Does anyone happen to know how to install the graphic picture in HMI when I go into blower selection there are no graphics shown not only blower...
Replies
1
Views
65
Jkoso
J
P
WinCC RT Advanced - Data Logging Memory
Hi folks, I'm not as accustom with Siemens & WinCC, however I've been asked to increase the amount of data an existing application is logging...
Replies
2
Views
67
Plantationpark
P
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
146
mk42
M
A
Buttons Not Working in WinCC Unified
I am creating a project with WinCC Unified v16 Upd6 (PC runtime) with an S7-1200. The communication is good between the PC and the PLC as I can...
Replies
6
Views
198
drbitboy
drbitboy
Back
Top Bottom