Hi guys, have been playing with WinLC / STEP7 the entire day and still don't know the solution.
What I need:
-download s7 code into WinLC (done!)
-have access to WinLC registers from 3rd party SCADA via standard s7 connection
I've got 2 options:
a) SCADA sits on the same PC as WinLC
b) SCADA sits on the other PC, comms is done via ordinary ethernet using ordinary network cards (built-in)
What's needed to sort this out? What driver/protocol is to be used? Have been trying different configurations, drivers, etc., but with no success.
Thanks for your help!
What I need:
-download s7 code into WinLC (done!)
-have access to WinLC registers from 3rd party SCADA via standard s7 connection
I've got 2 options:
a) SCADA sits on the same PC as WinLC
b) SCADA sits on the other PC, comms is done via ordinary ethernet using ordinary network cards (built-in)
What's needed to sort this out? What driver/protocol is to be used? Have been trying different configurations, drivers, etc., but with no success.
Thanks for your help!