Bobbias
Member
Ok, so I've kinda abandoned the servo project.
Anyway, I'm trying to figure out how to wire up an OADM20I4470/S14C. I've got a 1746-NI4 analog input on a SLC5/04, that I'd like to wire it to, but I'm not quite sure how to wire things.
The OADM has + and 0v input, but only 1 output (well, 2, but either 0-10V or 4-20ma, and only 1 wire for each.)
So With the input card having + and - in, as well as a common, I'm not really sure how I'm supposed to wire that.
I've looked at the 1746-um005_-en-p.pdf on the AB website, but the diagrams aren't exactly helpful, since this doesn't fall under any of the things shown there.
Anyway, I'm trying to figure out how to wire up an OADM20I4470/S14C. I've got a 1746-NI4 analog input on a SLC5/04, that I'd like to wire it to, but I'm not quite sure how to wire things.
The OADM has + and 0v input, but only 1 output (well, 2, but either 0-10V or 4-20ma, and only 1 wire for each.)
So With the input card having + and - in, as well as a common, I'm not really sure how I'm supposed to wire that.
I've looked at the 1746-um005_-en-p.pdf on the AB website, but the diagrams aren't exactly helpful, since this doesn't fall under any of the things shown there.