ZOIDDC operator panel problem

Adam18

Member
A
Join Date
Feb 2017
Location
Kells
Posts
1
Hi everyone,

After few years off we just tried to run a very old thermoforming machine Cannon-Shelley TP-3624 with a DirectLogic DL-330 D3-330 cpu plc and a Kessler-Ellis ZOIDDC-DCU-L operator panel.

The PLC is working fine, but the battery died in the ZOID and we've lost the software.
Does anyone have a backup of this software, is it possible to restore or rewrite?
Where do we go from here?

I've contacted the manufacturer of the machine and KEP, but both of them said the machine is too old and they have no files on record.


Thanks in advance
Adam
 

Similar Topics

tlf30
Dirt cheap digital indicator + operator input
Hello, I'm looking for a dirt cheap digital display + input, that would be wired to an analog input and analog output. This would be for my home...
Replies
10
Views
232
jaden
J
Mas01
S7/TIA Portal: HMI KTP1200 "Virtual Keypad is too small" says operator...
...and I agree. Context: TIA Portal/HMI = KTP1200 (12" screen) In the attached redacted image, the values in the white boxes are entered by the...
Replies
10
Views
729
mk42
M
R
AtlasCopco Operator Guidance
Hello All, We have assembly line and our supplier building automated line on top of it we are interfacing mes system. Our automation supplier...
Replies
0
Views
287
ravig
R
chud
Hmist6 (operator terminal expert) and tia portal
Has anyone setup comms between an operator terminal expert hmi (model doesnt matter) and tia portal? Cant find much on the web. There is a small...
Replies
2
Views
860
Lare
L
S
Error:Operator Control & Monitoring (301:303) in Step7 5.7
Hello, When trying to enable the Operator Control & Monitoring features in Data blocks of the Step 7 5.7 project it gives the Error of Operator...
Replies
0
Views
925
simaran2010
S
Back
Top Bottom