Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi All,
Just want to know, what the meaning from "Retentive data lost " on Micrologix1000?
Yesterday, my Micrologix 1000 get fault.I have checked with RSLogix500, and the error is caused by retentive data lost.
On error tab(Processor status) the retentive data lost was set(s:5/8 =1).Problem will solve only if the s:5/8 =0, and I have done it.
My question is what cause and when the retentive data lost will occur, so in the future ,this error doesn't happend again.
Thanks all.
Regards,
Deer
Just want to know, what the meaning from "Retentive data lost " on Micrologix1000?
Yesterday, my Micrologix 1000 get fault.I have checked with RSLogix500, and the error is caused by retentive data lost.
On error tab(Processor status) the retentive data lost was set(s:5/8 =1).Problem will solve only if the s:5/8 =0, and I have done it.
My question is what cause and when the retentive data lost will occur, so in the future ,this error doesn't happend again.
Thanks all.
Regards,
Deer