No Communications:
Here are the settings:
Laptop - Dell running windows XP Pro, service pack 2
USB cable in COM Port (COM4) USB DH-485 Serial Port, Settings: 19200, 8bits, No Parity, 1 Stop bit, Flow control None. Driver Version 1.0.2115.0 ,connected to the Allen-Bradley 1747-UIC
Cat5 Ethernet cable via RS485 (DH485) to SLC 5/03 CPU, Processor 1747-L532, OS1747-OS301 (did not replace battery) and this is an old unit.
RSLinx Lite - Revision 2.41.00 (Build 10) 17 available Driver Types, current RS-232 DF1 devices driver. Settings on RS-232 DF1 Device: Com Port: (COM4), Device: (1770-KF3/1747-KE), Baud Rate: (19200), Station Number: (00), Parity: (None), Error Checking: (BCC), Stop Bits: (1), Protocol: (Full Duplex)
RSLogix 500 Pro - Controller Properties: (General1747-L532B 5/03 CPU - 16k Mem. OS301), Controller Communications: (Driver AB_DF1-1, Route local, Processor Node 0,
I have a new .RSS Program Open. When I try to go online I get a RSLogix 500 Pro ALERT window "No response from processor at selected path/node! DiagnosticStatus failed: 0x4"
Any Help is appreciated.